PowerPRO 500 Power Supply for Electrophoresis
The PowerPRO 500 Power Supply is a high-performance, general-purpose electrophoresis power supply designed to support a broad range of laboratory electrophoresis applications. It provides maximum outputs of 500V, 800mA and 300W, giving laboratories the flexibility required for routine and advanced electrophoresis workflows.
With five pairs of output connections, the PowerPRO 500 can operate multiple compatible electrophoresis units. It supports constant voltage, constant current and constant power operation, while its programmable functionality allows users to create protocols with gradual changes in electrical parameters during a run.
This flexibility makes the PowerPRO 500 particularly suitable for applications such as Denaturing Gradient Gel Electrophoresis (DGGE) and large-format vertical PAGE, where controlled stepwise changes can be important. The manufacturer’s product information specifically identifies the unit for use with Cleaver Scientific VS20-DGGE and WAVE systems.
PowerPRO 500 Power Supply Key Features
- Maximum output voltage: 500V
- Maximum current: 800mA
- Maximum power: 300W
- Five pairs of output sockets
- Constant voltage operation
- Constant current operation
- Constant power operation
- Programmable six-step operation
- Up to 30 programmable files
- Built-in pre-programmed protocols
- 2.4-inch TFT-LCD display
- Pause/resume function
- 1–999 minute timer
- 1V and 1mA resolution
- Microprocessor-controlled operation
- No-load detection
- Overload detection
- Ground leakage detection
- Over-temperature protection
- Shrouded plugs and sockets
- Flame-retardant ABS faceplate
- CE compliance
Technical Specifications
| Specification | PowerPRO 500 |
|---|---|
| Product Type | Electrophoresis Power Supply |
| Maximum Voltage | 500V |
| Maximum Current | 800mA |
| Maximum Power | 300W |
| Output Pairs | 5 |
| Operating Modes | Constant Parameter / Programmable |
| Programmable Steps | Up to 6 steps |
| Stored Programs | Up to 30 |
| Timer | 1–999 minutes |
| Display | 2.4-inch TFT |
| Resolution | 1V, 1mA |
| Controller | Microprocessor |
| Input Voltage | 100–240V, 47–60Hz |
| Input Power | 400W |
| Operating Temperature | 4°C–40°C |
| Operating Environment | ≤95% RH |
| Dimensions | 21.5 × 33.5 × 10.4 cm |
| Weight | 2.1 kg |
| Output Diameter | 4mm |
| Safety | No-load, overload, leakage and over-temperature protection |
| Compliance | CE |
Why Choose the PowerPRO 500 Power Supply?
The PowerPRO 500 Power Supply is designed for laboratories that require more voltage and power flexibility than entry-level electrophoresis power supplies.
Its 500V maximum output makes it suitable for electrophoresis systems requiring higher voltage operation, while the 800mA current and 300W maximum power provide additional operating capacity.
The programmable function is especially useful for protocols where electrical parameters need to change during the run. Up to 30 programs can be stored, with each program supporting up to six steps.
The five output pairs also provide flexibility when operating compatible electrophoresis systems. The PowerPRO 500 is listed for routine horizontal electrophoresis with multiSUB Mini, Midi and Choice, vertical electrophoresis using omniPAGE Mini, Cleaver Scientific DGGE, and vertical electrophoresis using omniPAGE Maxi.
Applications
The PowerPRO 500 is suitable for:
- DNA electrophoresis
- RNA electrophoresis
- Agarose gel electrophoresis
- Protein electrophoresis
- PAGE
- Large-format vertical PAGE
- Denaturing Gradient Gel Electrophoresis (DGGE)
- Routine horizontal electrophoresis
- Molecular biology research
- Biotechnology laboratories
- University research laboratories
- Teaching laboratories
What is the PowerPRO 500 Power Supply?
The PowerPRO 500 is a programmable laboratory electrophoresis power supply providing up to 500V, 800mA and 300W.
What is the maximum output of the PowerPRO 500?
The maximum output is 500V, 800mA and 300W.
How many output connections does the PowerPRO 500 have?
The unit has five pairs of output connections.
Is the PowerPRO 500 programmable?
Yes. It can store up to 30 programs, with up to six steps per program.
What applications is the PowerPRO 500 suitable for?
It is suitable for horizontal and vertical electrophoresis, including agarose electrophoresis, PAGE and DGGE applications.
Does the PowerPRO 500 have safety protection?
Yes. It includes no-load, overload, ground leakage and over-temperature detection/protection features.
Reviews
There are no reviews yet.