The nanoPAC-300P Power Supply is an ultra-compact electrophoresis power supply designed for reliable DNA, RNA and protein electrophoresis applications. With a maximum output of 300V, 400mA and 60W, it provides the control and flexibility required for routine horizontal and vertical gel electrophoresis in research, teaching and laboratory environments.
The nanoPAC-300P combines a compact footprint with precise voltage and current adjustment. The output can be adjusted in 1V and 1mA increments, allowing users to establish controlled electrophoresis conditions for different gel systems and separation requirements. The unit supports constant-voltage or constant-current operation and includes a microprocessor-controlled interface.
Key Features and Benefits
The nanoPAC-300P Power Supply provides several practical features for modern molecular biology laboratories:
- 300V maximum output voltage for routine electrophoresis applications.
- 400mA maximum output current for a wide range of small and medium electrophoresis systems.
- 60W maximum power output for compatible gel electrophoresis applications.
- Two parallel output pairs, allowing two electrophoresis units to be operated simultaneously when system requirements permit.
- 1V and 1mA adjustment resolution for precise experimental control.
- Two-step programmable operation for changing voltage, current and time during a run.
- Continuous operation or timer control from 1 to 999 minutes.
- 3-digit LED display for clear monitoring of operating parameters.
- Built-in safety features, including no-load detection and protected/shrouded plugs and sockets.
- Alarm function for improved run monitoring.
- Easy-to-clean polycarbonate housing suitable for routine laboratory environments.
- Compact dimensions that help save valuable laboratory bench space.
These features make the unit particularly useful where a laboratory needs a straightforward and space-saving 300V electrophoresis power supply without the larger footprint of high-capacity laboratory power systems.
Technical Specifications
| Specification | nanoPAC-300P |
|---|---|
| Product Type | Electrophoresis Power Supply |
| Model | nanoPAC-300P |
| Maximum Output Voltage | 300V |
| Output Voltage Range | 0–300V |
| Voltage Adjustment | 1V increments |
| Maximum Output Current | 400mA |
| Output Current Range | 10–400mA |
| Current Adjustment | 1mA increments |
| Maximum Output Power | 60W |
| Output Type | Constant Voltage / Constant Current |
| Output Pairs | 2 parallel pairs |
| Control | Microprocessor controller |
| Timer | 1–999 minutes or continuous |
| Display | 3-digit LED |
| Programming | Two-step programmable operation |
| Safety | No-load detection; shrouded plugs and sockets |
| Input Voltage | 100–240V AC |
| Frequency | 50–60Hz |
| Dimensions | 140 × 191 × 84mm |
| Approx. Weight | 1kg |
| Housing | Polycarbonate |
| Application | DNA/RNA and protein electrophoresis |
nanoPAC-300P Power Supply for DNA and RNA Electrophoresis
DNA and RNA electrophoresis requires stable and controllable electrical conditions to achieve reproducible separations. The nanoPAC-300P is designed for use with compatible horizontal gel electrophoresis systems, making it suitable for routine nucleic-acid separation workflows.
Its compact design is particularly useful for teaching laboratories, research laboratories and facilities where bench space is limited.
For agarose gel electrophoresis, users can select appropriate voltage and current settings according to their gel tank, buffer system, gel dimensions and experimental protocol.
nanoPAC-300P for Protein Electrophoresis
The unit can also be used with compatible vertical electrophoresis systems for protein separation. It is suitable for routine applications where controlled voltage or current is required.
The programmable two-step function provides additional flexibility when an electrophoresis protocol requires different operating conditions during different stages of a run.
Two-Step Programmable Operation
One of the useful features of this electrophoresis power supply is its two-step programming capability.
The operator can program STEP 1 and STEP 2 with the desired voltage, current and time parameters. Once the run starts, the nanoPAC-300P automatically progresses through the programmed steps.
This can simplify protocols that require an initial electrophoresis condition followed by a second condition without manually changing the settings during the run.
Compact Design for Laboratory Work
The nanoPAC-300P has an ultra-compact footprint of approximately 140 × 191 × 84mm and weighs approximately 1kg.
Its compact polycarbonate housing is easy to clean and helps conserve bench space. Two parallel output pairs can also improve laboratory efficiency by allowing two compatible electrophoresis units to be connected simultaneously.
Safety Features
Laboratory electrophoresis requires appropriate electrical safety controls. The nanoPAC-300P incorporates built-in safety functions including no-load detection and shrouded plugs and sockets.
An alarm function provides additional operational feedback, while the 3-digit LED display makes the selected and operating parameters easy to monitor.
Always follow the manufacturer’s operating instructions and the safety requirements applicable to the connected electrophoresis equipment.
Why Choose the nanoPAC-300P?
The nanoPAC-300P is a practical choice for laboratories looking for a compact and versatile electrophoresis power supply.
Key reasons to choose nanoPAC-300P Power Supply
- 300V maximum voltage
- 400mA maximum current
- 60W maximum power
- Precise 1V and 1mA adjustment
- Two parallel output pairs
- Two-step programmable operation
- Timer up to 999 minutes
- Continuous-run capability
- Built-in safety functions
- Compact laboratory footprint
- Suitable for compatible DNA/RNA and protein electrophoresis systems
Applications
The nanoPAC-300P can be used in a variety of laboratory environments, including:
- Molecular biology laboratories
- Biotechnology laboratories
- University teaching laboratories
- Research and development laboratories
- Pharmaceutical research laboratories
- Life-science laboratories
- DNA/RNA agarose gel electrophoresis
- Protein gel electrophoresis
- Routine electrophoresis experiments
The unit is designed for compatible Cleaver Scientific horizontal multiSUB™ systems and omniPAGE™ mini vertical systems.
Who Is It For?
The nanoPAC-300P is suitable for researchers, laboratory technicians, university laboratories, biotechnology facilities and molecular biology laboratories that need a compact 300V electrophoresis power supply for routine gel electrophoresis.
Its simple controls and compact construction also make it useful for teaching laboratories where ease of operation and efficient use of bench space are important.
How to Use the nanoPAC-300P
- Connect the compatible electrophoresis tank to the appropriate output terminals.
- Confirm that the gel tank and cables are correctly connected.
- Select constant-voltage or constant-current operation according to the experimental protocol.
- Set the required voltage and/or current.
- If required, configure the two-step program.
- Set the required running time or select continuous operation.
- Start the electrophoresis run and monitor the displayed parameters.
- After completing the run, stop the power supply and follow the manufacturer’s shutdown procedure.
Always use settings appropriate for the connected electrophoresis system and follow the manufacturer’s operating instructions.
Related Laboratory Equipment
For a complete electrophoresis workflow, the nanoPAC-300P can be combined with compatible:
- Horizontal gel electrophoresis systems
- Vertical PAGE electrophoresis systems
- Agarose gel tanks
- Protein electrophoresis tanks
- Electrophoresis accessories
- Gel documentation systems
What is the nanoPAC-300P Power Supply?
The nanoPAC-300P is a compact electrophoresis power supply designed for compatible DNA/RNA and protein gel electrophoresis systems. It provides up to 300V, 400mA and 60W.
What is the maximum voltage of the nanoPAC-300P?
The nanoPAC-300P provides a maximum output voltage of 300V, adjustable in 1V increments.
What is the maximum current of the nanoPAC-300P?
The maximum output current is 400mA, with adjustment available in 1mA increments.
Can the nanoPAC-300P be used for DNA and RNA electrophoresis?
Yes. The unit is designed for compatible horizontal DNA/RNA electrophoresis systems, including Cleaver Scientific multiSUB™ systems.
Can it be used for protein electrophoresis?
Yes. The nanoPAC-300P is also designed for compatible vertical protein electrophoresis systems, including omniPAGE™ mini systems.
Does the nanoPAC-300P have a timer?
Yes. It supports continuous operation and timed runs from 1 to 999 minutes, with an alarm function.
Reviews
There are no reviews yet.